The Fusion 350 is the latest addition to the Stealth range. It is an entry level, rotormoulded kayak built with maximum stability and all the standard Stealth features; livewell, fish hatch, dry hatch and rod holders
Available to purchase, we have limited stock of the Fushion 480 which will arrive in New Zealand in our May Shipment. We have blue. green & orange all available in this shipment, with Yellow available in the following November shipment. Get your order in today to reserve this kayak.
Kayak deliveries within Auckland will be free of charge. Cost of kayak deliveries outside of Auckland will be calculated on request.
Read more about the standard features of the Fusion 480:
Moulded Carry Handle – These carry handles are easy to use as they mold to your hand when carrying the ski.
1 Drain Hole – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Scratch Pad And Elastic – A protective matt is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Custom Brandings are used to give you a unique look and feel on the branding of the kayak.
Fiberglass Fish Hatch Lid – The lid is made from standard fiberglass construction. This lid also gives you easy access to a large central fish hatch. There is a protective pad on the hatch lid which can be used for cutting your bait or as a simple work area.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot which curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch.
Live Bait Well – This is a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous changes in water keeps the oxygen supply fresh and therefore your bait will stay alive for a long period of time.
Splash Cover – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self Drainer Holes – Factory installed drain holes in your footwells and seat to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handles – Soft molded carry handles to assist with the carrying, loading, and unloading of your kayak. The handles can also be used for attaching your backrest or seat system to the kayak.
Trawling Rod Holders – 2 Standard 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods.
90 Degree Rod Holders – Two standard up-right holders for extra rods.
Large Rear Storage Hatch – Rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Small Recess And Rear Webbing for extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Under Stern Or Over Stern Rudder – Neatly designed small rudder that gives the kayak excellent turning and maneuverability. A very strong 10mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder. Over stern rudder optional for the rough terrain.
Read more about the standard features of the Fisha 460:
Webbing Carry Handles – These carry handles are easy to use as they mold to your hand when carrying the ski.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – A protective mat is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Custom Fisha Stickers are used to give you a unique look and feel on the branding of the kayak.
Fiberglass Fish Hatch Lid – The lid is made from standard fiberglass construction. This lid also gives you easy access to a large central fish hatch. There is a protective pad on the hatch lid which can be used for cutting your bait or as a simple work area.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot which curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Shock Cord Rod Rack System – Easy to use stretchy shock cord system allows you to place the butt of your rod under it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood. This also prevents your rods of sliding forward when beaching.
Live Bait Well – this a new addition to our kayaks. There is an inlet and outlet in the bait well which allows fresh water to enter and old water to exit out the bottom of the kayak while you are paddling. This continuously change in water keeps the oxygen supply fresh and therefore your bait will stay alive for long period of time. View a video about it here.
Splash Cover – This is used to secure your hatch lid to the kayak but also acting as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self Drainer Holes – Factory installed drain holes in your foot wells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the foot wells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handles – Soft molded carry handles to assist with the carrying, loading and unloading of your kayak. The handles can also be used for attaching your back rest or seat system to the kayak.
Trawling Rod Holders – 2 Standard 50 degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle makes it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
90 Degree Rod Holders – View a video about this here.
Large Rear Storage Hatch – Rear hatch which has an 8 inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store you extra tackle, lures, safety equipment and more.
Small Recess And Rear Webbing for extra storage of any larger items you would like to take with. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Fiberglass Rudder– Neatly designed small rudder that gives the kayak excellent turning and maneuverability. A very strong 10mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Fisha 500 below:
Webbing Carry Handles – These carry handles are easy to use as they mold to your hand when carrying the ski.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – a protective mat is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Custom Fisha Stickers are used to give you a unique look and feel on the branding of the kayak.
Fiberglass Fish Hatch Lid – the lid is made from standard fiberglass construction. This lid also gives you easy access to a large central fish hatch. There is a protective pad on the hatch lid which can be used for cutting your bait or as a simple work area.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Shock Cord Rod Rack System – Easy to use stretchy shock cord system allows you to place the butt of your rod under it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood. This also prevents your rods from sliding forward when beaching.
Live Bait Well – This is a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous change in water keeps the oxygen supply fresh and therefore your bait will stay alive for a longer period of time. View a video about it here.
Splash Cover – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag /Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System– This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handles – Soft molded carry handles to assist with the carrying, loading, and unloading of your kayak. The handles can also be used for attaching your backrest or seat system to the kayak.
Trawling Rod Holders – 2 Standard 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
90-Degree Rod Holders – View a video about this here.
Large Rear Storage Hatch– The rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Small Recess And Rear Webbing - Extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Fiberglass Rudder – Neatly designed small rudder that gives the kayak excellent turning and maneuverability. A very strong 10mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Fisha 555 below:
Molded Carry Handles – These carry handles are molded for extra strength. We also offer sleeves which makes it easier to grip and hold the handles.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – A protective mat is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Custom Fisha Stickers are used to give you a unique look and feel on the branding of the kayak.
Fiberglass Fish Hatch Lid – The lid is made from standard fiberglass construction. This lid also gives you easy access to a large central fish hatch. There is a protective pad on the hatch lid which can be used for cutting your bait or as a simple work area.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Shock Cord Rod Rack System – Easy to use stretchy shock cord system allows you to place the butt of your rod under it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood. This also prevents your rods from sliding forward when beaching.
Live Bait Well – This a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous change in water keeps the oxygen supply fresh and therefore your bait will stay alive for a long period of time. View a video about it here.
Splash Cover – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handles – Soft molded carry handles to assist with the carrying, loading, and unloading of your kayak. The handles can also be used for attaching your backrest or seat system to the kayak.
Trawling Rod Holders – 2 Standard 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
90-Degree Rod Holders – View a video about this here.
Large Rear Storage Hatch – Rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Small Recess And Rear Webbing for extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – easy access from this cover to your rudder and rudder system.
Fiberglass Rudder – Neatly designed small rudder that gives the kayak excellent turning and maneuverability. A very strong 10mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Fisha Duo:
Molded Carry Handles – These are molded carry handles for easy carrying of your kayak. We also supply sleeves that fit over the handles for easier gripping when carrying.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – A protective matt is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Stickers are used to give you a superior look and feel on the branding of the kayak.
STd Fish Hatch Lid – The lids give you easy access to a large central fish hatch. There is also a protective pad on the hatch lid which can be used for cutting your bait.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Live Bait Well – This is a new addition to our Fish a duo kayak. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous change in water keeps the oxygen supply fresh and therefore your bait will stay alive for a long period of time. View a video about it here.
Splash Cover – this is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in all four of your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handle – Soft molded carry handle to assist with the carrying, loading, and unloading of your kayak.
Back Rest Loop – Small loop is used for attaching your backrest or seat system to the kayak, on the opposite side the handle can be used.
Trawling Rod Holders - 2 std 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
Large Rear Storage Hatch –Rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Extra Rear Upright Rod Holder – This rod holder is used for positioning those extra rods and reels, we all like to take with them. The more upright position of then rods makes them easy to access from your seated position in the kayak. View a video about this here.
Rudder Cover – easy access from this cover to your rudder and rudder system.
Fiberglass Rudder – neat designed small rudder that gives the kayak excellent turning and maneuverability. A very strong 10 mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Pro Fisha 475 below:
Molded Carry Handles – These are molded carry handles for easy carrying of your kayak. We also offer sleeves for an easy grip.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Vinyl Pad And Elastic – A protective pad is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the vinyl pad. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Stickers are used to give you a superior look and feel on the branding of the kayak.
Carbon Fiber Fish Hatch Lid – The lid is made from carbon fiber to keep it lighter than std fiberglass as well as a little stiffer and a superior look and feel. This lid gives you easy access to a large central fish hatch. There is also a protective pad on the hatch lid which can be used for cutting your bait.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Live Bait Well – This is a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous change in water keeps the oxygen supply fresh and therefore your bait will stay alive for a long period of time. View a video about it here.
Stainless Steel Rod Bar – This cleverly designed rod bar allows you to place the butt of your rod on it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood.
Splash Strip – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handle – Soft molded carry handle to assist with the carrying, loading, and unloading of your kayak.
Backrest Loop – Small loop is used for attaching your backrest or seat system to the kayak, on the opposite side the handle can be used.
Trawling Rod Holders – 2 std 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
Large Rear Storage Hatch - Rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Two Standard Rear Upright Rod Holders - These rod holders are used for positioning those extra rods and reels, we all like to take with them. The more upright position of then rods makes them easy to access from your seated position in the kayak. View a video about this here.
Small Recess And Rear Webbing for extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Carbon Fiber Rudder – Neat designed a small rudder that gives the kayak excellent turning and maneuverability. The carbon fiber material makes it a little lighter and stronger. A very strong 10 mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Pro Fisha 525 below:
Molded Carry Handles – These are molded carry handles for easy carrying of your kayak. We also supply sleeves that fit over the handles for easier gripping when carrying.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – A protective matt is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Stickers are used to give you a superior look and feel on the branding of the kayak.
Carbon Fiber Fish Hatch Lid – The lid is made from carbon fiber to keep it lighter than std fiberglass as well as a little stiffer and a superior look and feel. This lid gives you easy access to a large central fish hatch. There is also a protective pad on the hatch lid which can be used for cutting your bait.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Live Bait Well – This is a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. These continuous changes in water keep the oxygen supply fresh and therefore your bait will stay alive for a long period of time. View a video about it here.
Stainless Steel Rod Bar – This cleverly designed rod bar allows you to place the butt of your rod on it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood.
Splash Cover – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handle – Soft molded carry handle to assist with the carrying, loading, and unloading of your kayak.
Backrest Loop – Small loop is used for attaching your backrest or seat system to the kayak, on the opposite side the handle can be used.
Trawling Rod Holders - 2 std 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
Large Rear Storage Hatch – Rear hatch has an 8 inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store you extra tackle, lures, safety equipment and more.
Two Standard Rear Upright Rod Holders – These rod holders are used for positioning those extra rods and reels ,we all like to take with.The more upright position of then rods makes them easy to access from your seated position in the kayak. View a video about this here.
Small Recess And Rear Webbing for extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Carbon Fiber Rudder – Neatly designed a small rudder that gives the kayak excellent turning and maneuverability. The carbon fiber material makes it a little lighter and stronger. A very strong 10 mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
Read more about the standard features of the Pro Fisha 575 below:
Molded Carry Handles – These are molded carry handles for easy carrying of your kayak.
2 Drain Holes – One for the fish hatch and one for the kayaks hull, these bungs are a simple screw-in type and easy to open and close.
Paddle Rubber And Elastic – A protective mat is used here to prevent the slipping around of your paddle when it is secured under the paddle elastic. The paddle elastic is a shock cord with a clear tubing to keep your paddle secure on the mat. The mat also reduces the amount of scratching when slipping your paddle in and out of the elastic.
Stickers are used to give you a superior look and feel on the branding of the kayak.
Carbon Fiber Fish Hatch Lid – The lid is made from carbon fiber to keep it lighter than std fiberglass as well as a little stiffer and a superior look and feel. This lid gives you easy access to a large central fish hatch. There is also a protective pad on the hatch lid which can be used for cutting your bait.
Central Fish Hatch – This is a very large central storage area used for stowing your rods and reels when launching and beaching in rough waters and of course as well as excellent storage for those big fish you catch. The hatch has a built-in rod shoot that curves upwards so that when your rods are stored they can be kept above the fish and anything else you have in the hatch. View a video about it here.
Live Bait Well – this is a new addition to our kayaks. There is an inlet and outlet in the bait well which allows freshwater to enter and old water to exit out the bottom of the kayak while you are paddling. This continuous change in water keeps the oxygen supply fresh and therefore your bait will stay alive for a long period of time. View a video about it here.
Stainless Steel Rod Bar – This cleverly designed rod bar allows you to place the butt of your rod on it to keep the rods up and out the way of anything inside the hatch. Reducing the chances of your prize rods and reels getting covered in fish slime and blood.
Splash Cover – This is used to secure your hatch lid to the kayak but also acts as a prevention for the waves forcing water under the lid when launching through the surf.
Hatch Lever Locks – These superior lever lock cam straps allow you to apply maximum pressure to your fish hatch lid when securing it closed. The fold-over cam creates that extra pressure to make sure the least amount of water can get into your hatch if you accidentally roll over in your kayak.
Front Drag / Carry Handle – Carefully positioned soft molded handle for easy dragging or holding of your kayak when going in to launch.
Completely Adjustable Rudder And Pedal System – This adjustable pedal system is connected to a rudder with a rail system that can be easily adjusted to make sure you have maximum comfort when sitting in the kayak. Correctly positioned pedals can make a huge difference in the comfort of your kayak. The pedal system makes the kayak easy to steer using the under stern rudder. The rope clamps on the pedals also allow you to set your pedals at the best desired angle to keep them comfortable.
Self-Drainer Holes – Factory-installed drain holes in your footwells to allow easy release of the water that collects in and around your feet. There are neat covers with a small hole that completes the ability of the footwells to drain while paddling and moving forward.
Plastic Cable Caps – Neat little cable caps to cover the cable piping on your rudder system. These neaten up and make the access to the cable pipe easy in case the need ever arises to work on the rudder cables.
Side Carry Handle – Soft molded carry handle to assist with the carrying, loading, and unloading of your kayak.
Back Rest Loop – Small loop is used for attaching your backrest or seat system to the kayak, on the opposite side the handle can be used.
Trawling Rod Holders – 2 std 50-degree trawling rod holders used for placing your rods into while you want to paddle around and fish. The careful position and angle make it simple to access and use while you paddle and manage your lines and bait. There are 2 easily accessible plastic saddles next to the rod holders used for rod leashes to secure your fishing rods. View a video about this here.
Large Rear Storage Hatch - Rear hatch has an 8-inch lid that can be easily opened and closed for simple access to the storage hatch. Plenty of space to store your extra tackle, lures, safety equipment, and more.
Two Standard Rear Upright Rod Holders - These rod holders are used for positioning those extra rods and reels, we all like to take with them. The more upright position of then rods makes them easy to access from your seated position in the kayak. View a video about this here.
Small recess and rear webbing for extra storage of any larger items you would like to take with you. Can also be used for positioning and holding your bait box or live bait system.
Rudder Cover – Easy access from this cover to your rudder and rudder system.
Carbon Fiber Rudder – Neatly designed a small rudder that gives the kayak excellent turning and maneuverability. The carbon fiber material makes it a little lighter and stronger. A very strong 10 mm stainless steel shaft is used for the rudder and if ever bent can be simply bent back into position without compromising the strength or integrity of the rudder.
The Angla Carbon is a paddle we designed for the ultimate kayak fishing experience. A smaller blade size with an exceptional catch/bite phase makes it easy to paddle over longer distances but still has some power and acceleration. Lightweight Carbon construction with specific reinforcing in areas of the blade for the fisherman and paddlers who are a little harder on the paddles.Bright yellow stickers and logos for visibility on the water and your safety.
The entry-level Angla paddle is made using a std fiberglass laminate making it more affordable but heavier than the Carbon versions. Being the entry-level paddle in the range the Angla is the smallest blade size and caters for those who are new to the sport of kayaking or just simply converting from a flat blade to a user-friendly wing blade shape.
The paddle is also the most affordable and budget-friendly paddle in our range that will suit all types of paddlers or anglers.
A fiberglass press moulded lid with a shiny smooth finish on both sides. Purposely designed to be able to flush mount your fishfinder. The lid makes it easy to look at and see the screen while you are paddling and covering an area.
The lid also keeps the rear of the fishfinder and cables free from continuous water splash.
Under stern kayak rudder used to steer the kayak from left to right, These rudders are made from carbon fibre for the Pro fisha kayaks or std fibreglass for the fisha range of kayaks.
The have a solid 10 mm stainless steel shaft which does not bend very easily and is almost impossible to break off.
Click here to view how to install a rudder on your Stealth Kayak
The Deluxe roof rack covers are a fully adjustable roof rack cover that will suit all types of roof bars and even roll bars. The 4 easily adjustable velcro strips make the cover adapt to suit the bars of your vehicle. Very easy to install and adjust these covers offer excellent protection for your kayak when transporting them on a roof rack.
The covers are 550mm in width and will suit the vast majority of fibreglass kayaks.
The Stealth hatch sack was designed to fit in the Stealth Fusion range of kayaks. It is however suitable for use in any of the Stealth craft. This item is large and can accommodate sizeable Pelagic Fish
Solid black plastic carry handle is designed and shaped for maximum comfort when carrying your kayak.
Compatible with newer model kayaks from 2017 onward. Older kayak models can use different combinations of side and front/rear handles please match using the photos to verify your requirements.
Soft Cloth Material used to store paddle. The cover is merely a cloth cover used to keep your paddle clean and covered. There is no padding or extra protection but merely a cover.
Black toe strap plate made from injection molded plastic. This is used to secure handles, foot straps, hatch straps and other places that need the webbing to be secured down.
The very popular and cleverly designed kayak live bait tube.This live bait tube was designed for keeping live bait while on your kayak.
The tube is made from PVC and is easily folded or “squashed ” so that you can hide it away in any of your hatches and it will not take up to much space.
The ends of the Torpedo are dome-shaped with holes to let the water in and out.
The shape keeps the torpedo streamlined while it is in the water and you are paddling.
The rope ends with stainless snap hooks make it easy to secure anywhere on the side of your kayak.
Soft Eva 10mm foam bum pad. Can be glued down in the seat area of your kayak for extra comfort.10mm EVA gives just enough padding to make it a little more comfortable without making the seating position higher. This version has no easy peel and stick and glue is needed to apply it.
A lid used to cover the entrance of the kayaks main central hatch. This lid is made from fibreglass for std Fisha model kayaks and carbon fibre for the Pro fisha model kayaks.
The Deluxe back and seat rest is a comfortable yet simple backrest design that is made from high quality nylon.The easy to adjust straps allow you to fit the back rest in your ideal position simply by adjusting the length or tension on the side and rear straps.The side straps secure safely to points on the side of your kayak with stainless steel snap hooks while the rear straps connect with plastic clips just to hold it in position correctly.Easy to remove and position for optimum comfort.The backrest can be used on all types of kayaks as long as you have a point to secure it to like side handles or loops.
Our Deluxe Paddle Leash is our premium paddle leash , this PU coiled leash is easily attached to the Paddle Shaft with a Velcro Loop system, The Velcro loop secures firmly to the shaft when tightened. The PU cord can extend up to 2m. An absolute must on those windy and rough days.
These deluxe rod leashes are the ultimate rod leashes designed and made by ourselves.After years of fishing with basic and often irritating rod leashes, we designed these coiled leashes to make using a rod with a leash simple and easy.A very secure two tier velcro system which attaches above and below the real seat as well as the eyelet on the top of the leash to secure your trace or hooks onto.This keeps the hooks and jigs away from the actual reel or rod butt and of course easy to attach and undo.The extra strength coiled leash is attached so as to constantly avoid a tangle while using the reel or winding in.The coil stretches alot either to 2m or 3m depending on the type you chose.This means that there is never any reason to unclip your rod as the stretch allows the rod to be moved around the kayak all over and with ease.A must for every serious kayak fisherman.
Stealth Standard roof rack covers are made for standard square bar or aero bar roof racks.These covers are made from heavy-duty nylon with an 8mm eve foam protector to ensure your kayak gets a softer ride and is well protected.The have a velcro system that can be opened or closed to allow you to move or position the covers on your racks or even if you use another car.Easy to fit and ample protection makes these a must buy to help protect your kayak.Suitable for use with all types of kayaks.
The width of the covers is 510mm
The Stealth trucker cap is made of cotton twill and the back section is made of Nylon Mesh which is perfect for keeping your head protected from the sun as well as cool.
Carbon fibre covers used to cover the hole from the self drainers in the footwells. These covers fit the kayak so as not to make any protruding area that can catch your line.a small hole and clever design allows the water to drain from the footwells while you are moving forward. Set of 2